Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 15 items
CS Atmospheric Chamber System (patent pending)
The deodorizing liquid VEON-G "Veon Green" is vaporized using the deodorizing vaporization device "Sawayaka," enhancing the contact efficiency with odor molecules and neutralizing and decomposing them in an environmentally friendly deodorization method.
[New Concept Mass Spectrometry] For ultra-trace leak detection in encapsulated devices such as MEMS, life science devices, and semiconductors!
The "WATMASS-MPH DA System" is a new concept mass spectrometer that combines the technology of our ultra-low gas emission residual gas analyzer "WATMASS" with the technology of ultra-low gas emission vacuum structural materials (0.2% BeCu alloy). Our ultra-trace gas analysis device "WATMASS-MPH System" is capable of measuring destruction and leak rates (below 10^-15 Pa·m³/s). It is suitable for MEMS, life science devices, and sealing devices such as semiconductors! ★ We also accept various commissioned mass analyses (gas analyses) for device evaluation and material evaluation! ★ 【Features】 ■ Ultra-high sensitivity gas analysis device made of 0.2% BeCu alloy ■ Measurement accuracy evaluation obtained from AIST ■ Capable of measuring destruction and leak rates (below 10^-15 Pa·m³/s) ■ Commissioned mass analyses are also available * For more details, please refer to the PDF document or feel free to contact us.
Revolutionary vacuum source by Patent MJP
This is a notification from Yumeal MJP Co., Ltd. regarding the "official product name."
Realizing coexistence with the environment. The culmination of next-generation energy-saving technology.
Amidst the strict societal scrutiny regarding various pollution and odor issues, the necessity for deodorization equipment has become increasingly urgent. However, conventional deodorization methods have been burdened by problems such as installation space, deodorization efficiency, and costs. The deodorization system developed by Alpha Giken has overcome these challenges. By combining a horizontal wet deodorization system with a photocatalytic tower, it has achieved improved processing capacity compared to conventional equipment, along with excellent characteristics such as compactness and low cost. (Redox wet deodorization device)
The one-sided water discharge system expands possibilities in various fields.
The "Win-G SN Series" is a new alkaline ion cleaning water system that does not use chemical synthetic substances or surfactants, ensuring safety and security. You only need to change the tank approximately once every 24 hours. When decomposing 1 ton, it typically produces 1 ton of alkaline and acidic substances. With this product, almost no acidity is produced, resulting in less waste and being eco-friendly. 【Features】 ■ Compact, lightweight, and easy to operate ■ Adjustable pH concentration ■ Energy-saving design ■ One-sided water discharge method that does not waste water *For more details, please refer to the PDF materials or feel free to contact us.
Easy maintenance! Actively engaged in road snow melting and agricultural water intake!
Until now, water intake devices utilizing river water have faced issues with debris clogging at the intake point, making maintenance difficult. Additionally, when using groundwater, the costs for surveys, drilling work, and installation can be high, and there are also costs associated with pumping, such as electricity bills. Our device has achieved reduced maintenance, shortened construction periods, decreased overall costs, and minimized the land area required for installation. It is also possible to utilize 100% of the fast-flowing water for intake. The device is primarily used for winter snow melting and agricultural water intake, and in a smaller version, it is also popular as a household watering and snow melting intake device. For more details, please contact us or refer to the catalog.
Realization of simple and quick extraction through high-pressure fluid extraction and dispersed solid-phase extraction.
EDGE is a very simple and automated extraction system that is faster than Soxhlet extraction, ultrasonic extraction, and high-pressure fluid extraction. It can perform extractions on a wide range of samples and sizes. EDGE is a device that brings innovation to the extraction process for preparing analytical samples. Features: - Extraction can be completed in a short time (10-15 minutes), including extraction, filtration, cooling, and cleaning. - The sample holder (Q-Cup) is easy to assemble and clean. - It has a small footprint, allowing for other workspace to be secured. - It accommodates various applications such as PFAS and SVOC in soil, fat content in food, and additives in resins.
Realizing M2M! Providing solutions that contribute to business efficiency and speed enhancement!
The "GG Series" is an IoT device that collects on/off signals from contacts in real time and can transmit data via LAN or the internet. Using this device, you can achieve M2M at a low cost. We also provide software for data management and device monitoring servers. Additionally, we offer cloud services for management and monitoring, allowing you to use them according to your needs. 【Features】 ■ It is possible to apply voltage (24V) from the device or from the contact side. ■ The input side is equipped with on/off contact signals and RS-232C connections. ■ Compatible with machines from any manufacturer. ■ The output side uses standard internet communication protocols. ■ An IP address can be set for each device. *For more details, please refer to the PDF document or feel free to contact us.
Please compare! With the power of ions, freshness and flavor are enhanced, elevating the product to a higher level while maintaining freshness. The activation treatment gives vitality to the ingredients.
It overturns the common sense of expiration dates. The ability to maintain freshness of perishable foods, which is clearly noticeable in fresh and quickly perishable items, is 2 to 5 times greater than usual (including our company's experiments). By balancing ions to suppress the deterioration rate of food, not only is freshness maintained, but the negative charge lost during transportation is restored, reviving the freshness (color and flavor) of freshly harvested and picked items. - Effects at room temperature and refrigeration: Suppression of moisture evaporation, suppression of oxidation, suppression of bacterial growth. - Effects in chilled conditions (temperature range of -1°C to 0°C): Dormancy of bacteria, suppression of deterioration and aging of fresh meat, etc. - Effects during thawing: Suppression of drip loss. <Expected Effects> - Reduction in procurement costs due to decreased food waste (disposal). - Reduction in waste disposal costs due to decreased food waste (disposal). - Differentiation by handling materials that competitors cannot manage at the same price. - Possibility to approach ingredients that have been avoided due to fear of loss. - Improvement in customer satisfaction. - Reduction in labor costs. - Increased customer attraction rate due to improved ingredient quality. - Enhanced corporate image due to CSR evaluation for addressing food waste. Introduction through a rental system: No initial costs incurred, rental fees that fit within cost reduction measures. *Pre-introduction tests can also be conducted.
Custom-designed planning according to the drainage treatment capacity! We propose the appropriate treatment plant.
We would like to introduce our "Large Capacity pH Neutralization Treatment System SOC System." It is actively used for pH treatment on the clean water side of turbidity separation in tunnel construction projects. We will propose a suitable treatment plant with custom planning and design tailored to the treatment volume of the wastewater. The treatment capacity ranges from 60 to 3000 m³/h. Please feel free to contact us when you need assistance. 【System Components (Partial)】 ■ LR Type Reactor ■ Site Control Panel ■ Reaction Tank ■ Raw Water Tank ■ Cylinder Stand *For more details, please refer to the PDF materials or feel free to contact us.
It is a device that positions two films using an image processing device, a positioning device, and an optical microscope (cross mark), and bonds them together.
We are a company that provides comprehensive advice on positioning devices and builds products tailored to our customers' needs. We are committed to creating products through a consistent process from design, manufacturing, inspection, to delivery, and we can respond flexibly to meet specific requirements.
A method that preserves the original aroma and sweetness without additives! High-quality dried fruits can be made.
The Cool Air Drying System is a drying technology that preserves the original components of agricultural products, capturing their natural taste, aroma, and quality during processing. Conventional agricultural product drying methods often use hot air, which tends to eliminate the original components of the products, resulting in a lack of aroma and flavor, leading to the addition of substances like sugars in most cases. The Cool Air Drying System can produce high-quality dried foods that retain their original aroma and flavor without the need for added sugars or other additives. 【Features】 - Compact size with functionality comparable to large models - Achieves ideal running costs - No installation work required - Easy operation, can be equipped with a simple one-touch mechanism for type OKN For more details, please contact us or download the catalog.
Exploring new possibilities of X-ray imaging! Contributing to the quantification of good products and product development through data accumulation.
The "Smart X-ray SmaRoe" is an X-ray fluoroscopy device (X-ray inspection system) that uses computer imaging technology to make X-ray images more user-friendly. It achieves a reproducible X-ray irradiation imaging system with a compact micro-focus X-ray source and a unique shutter mechanism. It can assist not only in the detection of defective products and the quantification of good products but also in product development through data accumulation. We offer a lineup including the standard tabletop model "FLEX-M863," as well as the "FLEX-MH867" and "FLEX-M345," which have the ability to penetrate 15mm steel plates. 【Features】 ■ Ideal for X-ray inspection (fluoroscopy, cross-sectional observation, 3D) of small parts and circuit boards ■ PC-based data processing allows for easy handling of large volumes of data ■ Ultra energy-efficient design ■ Enhanced functionality of conventional standard imaging (2D images) ■ Enhanced functionality through stereo transmission imaging (2.5D images) ■ Enhanced functionality through 3D tomographic imaging (3D images) *For more details, please refer to the PDF document or feel free to contact us.
A wide range of products is featured, including an ultra-high-performance autopilot system and tank units!
This catalog introduces the steering device system "Vertex Navigation Series." It features the autopilot system "SA-10α Series," which achieves ultra-high functionality while being a popular model, along with a wide range of products including "steering wheels," "tank units," "single split chillers," and "dual split chillers." Please make use of this for selecting products. [Contents] ■ Autopilot System "SA-10α Series" ■ Hydraulic Steering Device - Steering Section ■ Cylinder Unit Passive Section ■ Electric Hydraulic Steering Device ■ Control Related Equipment *For more details, please refer to the PDF document or feel free to contact us.
Equipped with high performance and high productivity required for inspection devices, it enables reliable production management and quality assurance. It is an inspection device that anyone can easily operate.
Standard equipped with a 16k line sensor camera. The uniquely designed complete dome lighting suppresses shadow formation by diffusing white LEDs from all directions. Stable inspections can be performed with minimal image variation, even on highly glossy materials, foils, and holograms. Multiple master image registrations are possible. For example, by registering images of all hinges, it can accommodate different hinge types. It automatically recognizes feature points such as hinge numbers and switches to the corresponding master for inspection. By using DXF or PDF, operations such as setting troublesome areas or conditions are simplified, and high-precision settings are automatically performed, including both inside and outside the contour. Four types of judgment criteria are provided: density, red color, bleeding, and multiple points. Additionally, it automatically sorts single colors, gradients, text, plain backgrounds, and lines, enabling detailed and accurate inspections. Inspection filters and processing tailored to features such as line emphasis, color emphasis, and smudging are performed in the background to further enhance inspection performance. Evaluation judgments can be made based on individual values calculated in HSV color space, Lab, and ΔE. Optional features include character recognition and verification, barcode validation, and length measurement. *For more details, please refer to the PDF document or feel free to contact us.
